Technotrend S-2300 Premium FF – Installation unter XBMCbuntu 12.10
Inhalt
Inhalt
Beschreibung
Dieser Artikel beschreibt die Installation der TV Karte Technotrend S-2300 FF unter XBMCBuntu 12.10.
Hersteller | Technotrend |
Autor(en) | ohne |
Lizenz | Commercial |
OS | Linux – XBMCBuntu 14.04.1 lts |
Kernel | Kernel 3.5.0-21 generic Kernel 3.5.0-40 generic |
Funktion | io |
Status | open |
Installationsumgebung / -Voraussetzung
Getestet wurde die Hardware: Technotrend S-2300 Premium FF
mit der/den VDR Versionen: 1.7.23
unter der/den Ubuntu Version(en): 12.10
Installation
Technotrend S-2300 suchen
dmesg | grep -i dvb
[ 8.399201] dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw [ 8.399206] dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware [ 8.399208] dvb-ttpci: and can be downloaded from http://www.linuxtv.org/download/dvb/firmware/
Umgebung vorbereiten und Abhängigkeiten installieren und Suchdatenbank aktualisieren
sudo apt-get install mercurial linux-headers-3.2.0-34-generic-pae make gcc bzip2 build-essential libproc-processtable-perl mc jed checkinstall libcap-dev gettext locate
Firmware herunterladen und installieren
cd /lib/firmware/ sudo wget http://www.linuxtv.org/downloads/firmware/dvb-ttpci-01.fw-2622 ln -s /lib/firmware/dvb-ttpci-01.fw-2622 /lib/firmware/dvb-ttpci-01.fw
Neustart
shutdown -r now
Test der Technotrend S-2300 Premium FF
dmesg | grep -i dvb
[ 8.117616] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3) [ 8.386501] dvb-ttpci: gpioirq unknown type=0 len=0 [ 8.412136] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 [ 8.412139] dvb-ttpci: firmware @ card 0 supports CI link layer interface [ 8.460705] dvb-ttpci: Crystal audio DAC @ card 0 detected [ 8.939415] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 8.939671] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:07:00.0/input/input15 [ 8.939759] dvb-ttpci: found av7110-0.
Kernel Update
Nach Kernelupdate auf 3.5.0-40 wurde die S-2300 nicht mehr korrekt gestartet.
dmesg | grep -i dvb
[ 9.194243] dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw [ 9.194248] dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware [ 9.194250] dvb-ttpci: and can be downloaded from http://www.linuxtv.org/download/dvb/firmware/
Nach Treiber- und Firmware Update (vorgehensweise idetnisch) musste am Schluß noch die gepachte Firmware kopiert werden
cp /usr/local/src/vdr-sc-pb/dvbsddevice/dvb-ttpci-01-fe2624-patched.fw /lib/firmware
So, hab jetzt 3 Stunden gekämpft.
Version: ubuntu 12.04.2 auf USB Stick
folgende Vorgehensweise:
download von linuxtv.org/downloads/firmware, Datei dvb-ttpci-01.fw-2622 unter 6, AV7110
Terminal öffnen
cd /Downloads
kopieren mit sudo mv dvb-ttpci-01.fw-2622 /lib/firmware/dvb-ttpci-01.fw
sudo restart -r now